{"title":"Home page","description":null,"products":[{"product_id":"uno-2600-cartridge","title":"TBA's UNO-2600 Cartridge for Atari 2600 \u0026 Atari 7800","description":"\u003cp style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cem\u003eUnoCart -2600\u003c\/em\u003e is an Atari cartridge emulator. It supports cartridges with up to 64k of ROM and 32k of RAM. First, copy BIN, ROM or A26 files to an SD card and insert it into the cartridge.  It comes with a printed manual , and is in a 3D printed case with a choice of three professionally printed labels.  It works on PAL \u0026amp; NTSC systems!  It will also run on most 7800 machines (but will not run 7800 ROMs).\u003c\/p\u003e\n\u003cp\u003eIf you do not have files to run, consider purchasing \u003cstrong\u003eTBA's 8gb uSD card for the 2600-UNO\u003c\/strong\u003e!  It has HUNDREDS of files\u003c\/p\u003e\n\u003cp\u003eUpdate file: \u003cb\u003ehttps:\/\/tinyurl.com\/UNO2600Update\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eNote:  All known retail releases, including SuperCharger files, are known to work.  \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTA BENE:  We have received reports that SuperCharger files do no load past the first load.  This is a firmware issue that either crept into the subsequent iterations OR it was there from the beginning.  Whichever the case may be, please be aware that, at this time, you should not purchase the 2600 Uno if you are looking to do SuperCharger multi-load games.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMost files, including Pitfall II, runs fine on 99% of systems.  The firmware has been adjusted (we are on version 17) to maker sure of maximum compatibility.  However, someone always seems to find a system it does not like, so there you go.  That being said, we have not had a report of problems since the v13 release in 2019.  Please check the manual for specific details.  However, no guarantee is made as to whether a particular ROM\/file will work or not.  \u003c\/p\u003e\n\u003cp\u003eAdditionally, some non-standard 2600 Audio\/Visual modifications may prevent the UNO-2600 from working.  This does NOT mean your UNO-2600 is defective.  Returns because the UNO-2600 does not work with your A\/V modification will result in a re-stocking fee.\u003c\/p\u003e\n\u003cp\u003eFurthermore, as detailed in the manual, the UNO-2600 does not work in *any* system that is not a \u003cstrong\u003ereal\u003c\/strong\u003e 2600 or \u003cstrong\u003eclone\u003c\/strong\u003e.  For example, the Retron77 is an emulated 2600 on a chip that copies the ROM from your cartridge and runs it on its on board emulator.  This is like most of the new systems\u003cem\u003e including the Atari 2600+\u003c\/em\u003e. The 2600+ is an emulator on a chip. This is NOT a defect in the UNO-2600.  \u003cspan\u003eReturns because the UNO-2600 does not work with your emulation machine will result in a re-stocking fee.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNOTA BENE\u003c\/strong\u003e: This should be obvious, but just in case: \"Shell Only, No Label\" means exactly that--ONLY A 3D printed shell.  No cartridge, no label, no SD card.  NOTHING BUT A 3D PRINTED SHELL\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e Reviews:  \u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=aVz5T1e4Ee0\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=ObXRm5NFUVo\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Black","offer_id":15960877826148,"sku":"","price":49.99,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":15960877924452,"sku":"","price":59.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/Picture2.png?v=1544228048"},{"product_id":"atari-400-800-xl-xe-r-time-8-cartridge","title":"TBA's RT8 Cartridge replacement for R-Time 8 cartridge for Atari 800\/XL\/XE machines","description":"\u003ch3\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eNOTE: Cases will no longer be included with the Stand Alone replacement.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Brewing Academy's RT8 stand alone replacement cartridge (RT8SA) \u003c\/strong\u003eor The Brewing Academy's \u003cstrong\u003e TBA-RT8 Drop-in replacement\u003c\/strong\u003e (RT8DIR) is an automatic realtime clock\/calendar that plugs into your cartridge port. It can accept another cartridge into its built-in slot, and its battery should last three to five years. The R-Time 8 uses no cartridge memory and is decoded in memory locations $D5B8-$D5BF. R-Time 8 also supports BASIC, Pascal, AMODEM 7.2R and 1030\/850 Express. While the R-Time 8 will work with any Disk Operating System for the Atari, it is most effective with SpartaDOS.  It works with many other Atari DOSes.\u003c\/p\u003e\n\u003cp\u003eSpartaDOS stamps the current time and date on all files as you save them, keeping track of your latest versions. A simple command displays the time and date at the top of your screen. A software real-time clock is written into SpartaDOS, but it's less accurate than the R-Time 8 and must be reset every time you turn on your computer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:  The \"Drop-in replacement\" session is an assembled PCB and is meant to go inside of your old R-Time 8 shell!\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Stand Alone Replacement","offer_id":15961232998500,"sku":"","price":35.0,"currency_code":"USD","in_stock":false},{"title":"Drop-In Replacement","offer_id":15961233096804,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/Picturer8.png?v=1544228331"},{"product_id":"atari-st-mouse-adapter","title":"Atari ST Mouse Adapter for Atari Jaguar","description":"\u003cp\u003eUse your Atari ST compatible mouse on Jaguar cartridges that support it (such as Defender of the Crown, Gridrunner and many others)!  It will also use ST compatible trackballs!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupported Games: \u003c\/strong\u003e\u003c\/p\u003e\n\u003cblockquote\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/atariage.com\/store\/index.php?l=product_detail\u0026amp;p=1146\" style=\"color: #000000;\"\u003eDefender of the Crown\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eGridrunner (included with \u003ca href=\"https:\/\/atariage.com\/store\/index.php?l=product_detail\u0026amp;p=1109\" style=\"color: #000000;\"\u003eJeff Minter Classics\u003c\/a\u003e)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/www.etsy.com\/listing\/640121201\/elansar-atari-jaguar?ref=shop_home_active_3\u0026amp;sca=1\" style=\"color: #000000;\"\u003eElansar\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"http:\/\/atariage.com\/forums\/topic\/246639-atari-st-games-ported-to-the-jaguar\/page-42#entry4029171\" style=\"color: #000000;\"\u003eStar Wars Arcade\u003c\/a\u003e (Atari ST port)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/blockquote\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":16909950451812,"sku":"","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/Picture1_f1aea485-d0cd-405d-84db-0cd9d512a20c.png?v=1544643005"},{"product_id":"texas-instruments-finalgrom-99","title":"FG99: FinalGROM99 for the Texas Instruments 99\/4a","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003cstrong\u003eAs of 23 Sep, I have 1 left.  After that, I will no longer be producing them.  Tarrifs make them too expensive to create.\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe FinalGROM 99 supports ROM images, GROM images, and mixed images of up to 1 MB in size that use the write-to-ROM bank switching scheme. The cartridge does not require the Peripheral Expansion Box and runs on both PAL and NTSC consoles, including modified consoles with an F18A. It will also run on v2.2 consoles and enables those to run ROM-only programs.  \u003cstrong\u003eIt will NOT run on QI motherboards.  See this link to see if yours is a QI:  \u003c\/strong\u003e\u003ca class=\"\" href=\"http:\/\/mainbyte.com\/ti99\/computers\/ti99qi.html\"\u003ehttp:\/\/mainbyte.com\/ti99\/computers\/ti99qi.html\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe cartridge offers some advanced modes that provide RAM and GRAM to programs. It also allows a running program to reload another program from SD card or to dump its state to SD card. All firmware of the FinalGROM 99 can be updated by SD card.\u003c\/p\u003e\n\u003cp\u003eIf you would like a nice collection of files that can run on the FinalGROM99, please consider purchasing the \u003cstrong\u003e\u003ca title=\"TBA 16GB SD card for FG99\" href=\"https:\/\/thebrewingacademy.com\/collections\/sd-cards\/products\/ti-99-4a-card-with-110-files\"\u003eTBA 16GB SD card for FG99\u003c\/a\u003e \u0026lt;--click\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eShells are a random color.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Random Color","offer_id":16911146942564,"sku":"","price":115.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/s-l300.jpg?v=1544767385"},{"product_id":"tba-ultimate-atari-video-uav-board-for-atari-2600","title":"TBA's Ultimate Atari Video (UAV) board for Atari 2600","description":"\u003cp\u003e\u003cstrong\u003eAtari 2600 Ultimate Atari Video board (UAV)\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003ci style=\"color: #ff0000; text-decoration: underline;\"\u003eNow shipping!\u003c\/i\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003eThese boards were developed by Bryan Edewaard and sold by him for a long time.\u003cspan\u003e  \u003c\/span\u003eHe has now sold the rights for the rev. D version to The Brewing Academy and we are producing them for all machines.\u003cspan\u003e  \u003c\/span\u003eWhat does it do?\u003cspan\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eHas an on-board regulator to create a clean video power source.\u003c\/li\u003e\n\u003cli\u003eHas a 3-channel video amplifier designed for 75 ohm loads.\u003c\/li\u003e\n\u003cli\u003eHas a pixel re-clocking circuit to remove skew and better align the 4 luminance signals into a perfect pixel edge.\u003c\/li\u003e\n\u003cli\u003eHas a carefully designed chroma-shaping circuit.\u003c\/li\u003e\n\u003cli\u003ean adjustable pot on the board which controls the phase between the chroma and luma signals. A nice side-effect of this that you can change the artifact colors. There's also a jumper to invert the chroma which swaps the positions of the artifact colors.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe board plugs into the CD4050 socket for easy installation on most machines. It can be used in place of the original circuit or alongside it.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eYou will require RCA and\/or S-Video jacks to fully complete this installation.  You may purchaser them \u003ca data-mce-fragment=\"1\" title=\"Video input jacks\" href=\"https:\/\/thebrewingacademy.com\/collections\/ultimate-atari-video-uav\/products\/audio-video-connectors\" data-mce-href=\"https:\/\/thebrewingacademy.com\/collections\/ultimate-atari-video-uav\/products\/audio-video-connectors\"\u003ehere\u003c\/a\u003e:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis board in available in FIVE (5) configurations:\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e$34.99\/$29.99          NO MANUAL- KIT\/NO MANUAL-BASIC \u003c\/strong\u003eThis version is for those that either have a manual already OR know how to install it already.  Although we do keep a digital copy \u003ca title=\"UAV Manuals\" href=\"https:\/\/www.thebrewingacademy.net\/UAV_manuals.zip\"\u003ehere\u003c\/a\u003e, they are not always up to date.  This is generally for international customers that want to make sure they are under the 8 ounce (225 grams) limit for the lowest USPS shipping rate.  Everybody else starts at a pound (450 grams).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e$39.99\u003cspan\u003e             \u003c\/span\u003ePlug-In\u003c\/strong\u003e - To be absolutely clear, this is \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eONLY\u003c\/strong\u003e\u003c\/span\u003e for the 2600 Six-switch and the 2600 Junior.  \u003cstrong\u003eEVEN THEN\u003c\/strong\u003e only **SOME** versions of the 2600 six-switch \u0026amp; 2600 Jr. can use the plug-in version.  Please read instructions included.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e$34.99\u003cspan\u003e             \u003c\/span\u003eBasic\u003c\/strong\u003e - A basic version that must be wired in (missing the pin-headers and green terminal strip\u003cbr\u003e\u003cstrong\u003e$39.99\u003c\/strong\u003e\u003cspan\u003e            \u003c\/span\u003e\u003cstrong\u003eKit\u003c\/strong\u003e -A basic version with the components to make it a plug-in version for custom installations\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"UTF-8\"\u003e\u003cem\u003eInstall manual included with sale! NOTE: If you order multiple UAVs in one order, only one copy of the manual will be included.  Sorry, but the manual exceeds 50 pages now and it is costing more in postage to mail it than the UAV.  If you require multiple printed copies, the digital version is available via the link below.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need a digital version of the manual: http:\/\/www.thebrewingacademy.net\/UAV_manuals.zip\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNOTA BENE:\u003c\/strong\u003e\u003c\/span\u003e This involves soldering AND some ability to read a schematic and\/or discern how to install it in machines that there are not explicit instructions for.  If you cannot do this, either purchase installation from us, find a professional installer, or do not purchase the upgrade.  As we state in the manual, which is ALWAYS available for a free download PRIOR to purchase, \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #fa1111;\"\u003eThis manual is a \u003cstrong\u003ebeginning\u003c\/strong\u003e at a collection of all of installation materials created by Bryan and many other AtariAge users over the years on how to install a UAV into an Atari 400\/800\/XL\/XE\/XEL\/XLD machine (shortened hereafter as “A8 machines”) or Atari 2600s, 5200s, \u0026amp; 7800s!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #fa1111;\"\u003eIf you see an error, know of something that should be included or of a link that would be helpful, feel free to drop us a line at \u003ca href=\"mailto:macrorie@thebrewingacademy.com\" style=\"color: #fa1111;\" data-mce-href=\"mailto:macrorie@thebrewingacademy.com\"\u003emacrorie@thebrewingacademy.com\u003c\/a\u003e or “PM” MacRorie via AtariAge. Enjoy!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Basic","offer_id":23164993110116,"sku":"","price":34.99,"currency_code":"USD","in_stock":false},{"title":"Plug-In","offer_id":23416085774436,"sku":"","price":39.99,"currency_code":"USD","in_stock":false},{"title":"Kit","offer_id":23416085807204,"sku":"","price":39.99,"currency_code":"USD","in_stock":false},{"title":"NO MANUAL-BASIC","offer_id":32302397358182,"sku":"","price":29.99,"currency_code":"USD","in_stock":false},{"title":"NO MANUAL-Kit","offer_id":32302397620326,"sku":"","price":34.99,"currency_code":"USD","in_stock":false},{"title":"NO MANUAL 2600 Plug-In","offer_id":32309712355430,"sku":"","price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/UAV_A8_manual_2cec1705-3f93-4a90-be9a-d74e96113e25.JPG?v=1556741067"},{"product_id":"3d-printing","title":"3D Printing","description":"\u003cp\u003eThis is an option to print anything you need printed.  We will take your .STL file and print it at your specification.  We use FDM printing.  We offer two varieties:  Medium printing \u0026amp; high quality printing.  If you need severe overhang support, you MUST select high quality so that we can print it on our Ultimaker S5 with PVA support.\u003c\/p\u003e\n\u003cp\u003ePlease be advised, that the price is PER GRAM.  Please ask BEFORE ordering if you have any questions.  If you need us to calculate the weight of your item, please send us the STL file and we will give you quotation!\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Medium","offer_id":29438023041126,"sku":"","price":0.1,"currency_code":"USD","in_stock":true},{"title":"High (or Severe Overhang requiring extensive support)","offer_id":29437813424230,"sku":"","price":0.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0042.jpg?v=1564517554"},{"product_id":"1088xel-cartridge-tunnel-for-realan-h80","title":"1088XEL Cartridge Tunnel for Realan H80","description":"\u003cul\u003e\n\u003cli\u003eCartridge Tunnel for H80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAlthough not required, this makes inserting cartridges into the 1088XEL a breeze.\u003cspan\u003e  \u003c\/span\u003eThere is no chance that it will accidentally get dropped inside the case thus avoiding the need to open everything up.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFor examples of what the color options look like, \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/files\/pla_colors.pdf?18203408273877609383\" target=\"_blank\"\u003eview this file\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Black","offer_id":31097943949414,"sku":"","price":20.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":31097943982182,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Light Blue","offer_id":31097944014950,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Blue #2","offer_id":31097944047718,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Pink","offer_id":31097944080486,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Orange","offer_id":31097944113254,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Glow in the Dark","offer_id":31097944146022,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Forest Green","offer_id":31097944178790,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Brown","offer_id":31097944211558,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Yellow","offer_id":31097944244326,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Dandelion","offer_id":31097944277094,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":31097944309862,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Gold","offer_id":31097944342630,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":31097944375398,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Green","offer_id":31097944408166,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Purple","offer_id":31097944440934,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Neon Green","offer_id":31097944473702,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Blue #1","offer_id":31097944506470,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Red","offer_id":31097944539238,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"Natural","offer_id":31097944572006,"sku":"","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0237.jpg?v=1574802340"},{"product_id":"tbas-sdrive-max-no-case","title":"TBA's SDrive-MAX KIT","description":"\u003cp\u003eThis nice little unit comes WITHOUT a case but with an 8G microSD card full of ATR, XEX, \u0026amp; CAS files.  It is powered by USB (you supply the power, we supply the USB cable) and plugs into your SIO port.  Powered by Arduino UNO and an LCD touchscreen, it will replace your floppy drives and anything else you use to load files you download off of the interwebs!\u003c\/p\u003e\n\u003cp\u003ePackaged with:\u003c\/p\u003e\n\u003cp\u003e1 Programmed 2.8\" screen \u0026amp; Programmed UNO w\/ SIO interface card to play nice with others on the chain\u003c\/p\u003e\n\u003cp\u003e1 Stylus (to avoid fingerprints on screen)\u003c\/p\u003e\n\u003cp\u003e1 8GB uSD card with selection of software (ATR\/XEX\/CAS)\u003c\/p\u003e\n\u003cp\u003e1 printed Manual\u003c\/p\u003e\n\u003cp\u003e1 USB Male A to Male B cord (any USB charger will work to provide power to your unit.  Some power strips even have USB charge ports built-in to them)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYOU MUST ASSEMBLE IT.  You will also need half an SIO cable!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31202888613990,"sku":"","price":39.99,"currency_code":"USD","in_stock":true}]},{"product_id":"ps-2-mouse-adapter-for-atari-400-800-xl-xe","title":"PS\/2 Mouse adapter for Atari 400\/800\/XL\/XE","description":"\u003cp\u003eIf you have been wanting to explore FlashJazzCat's \u003ca href=\"https:\/\/atari8.co.uk\/gui\/\" title=\"Atari 8-bit GOS\"\u003eGraphical Operating System\u003c\/a\u003e for the 8-bit or you have a Diamond GOS cartridge and want to use a mouse, then look no further (farther?)!  \u003c\/p\u003e\n\u003cp\u003eThis little adapter will let you use any PS\/2 mouse ALSO, if your USB mouse is PS\/2 compliant, then you should be able to use it with a USB to PS\/2 adapter!\u003c\/p\u003e\n\u003cp\u003e(As a nice side note, this will also let you use a PS\/2 mouse on an Atari ST\/STe\/Mega)\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31272550891622,"sku":"","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0318.jpg?v=1578074297"},{"product_id":"atari-mega-st-keyboard-cable","title":"Atari Mega ST Keyboard Cable","description":"\u003cp\u003eIf your keyboard cable is frayed (or missing!) here is something that will fix you right up.  It has been tested in a Mega ST and works great!  All functions are 100% normal.\u003c\/p\u003e\n\u003cp\u003eThis is 1.5 feet long in its coiled state, but will easily stretch out to 5 feet if necessary.  It won't take up any more space on your desk than the standard Mega ST keyboard cable, but it will let you get a little room between you and your Mega ST!\u003c\/p\u003e\n\u003cp\u003eBrand new and made expressly for this purpose by The Brewing Academy!\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Black","offer_id":31522117222502,"sku":"","price":20.0,"currency_code":"USD","in_stock":false},{"title":"Silver","offer_id":31522117255270,"sku":"","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0256_2fd38cac-bb2c-4b9c-bd65-6c40b692cd24.jpg?v=1585165785"},{"product_id":"tipipeb-ti-raspberry-pi-interface-for-the-ti-peripheral-expansion-box","title":"TipiPEB: TI Raspberry Pi Interface for the TI Peripheral Expansion Box","description":"\u003cp\u003eThe Brewing Academy presents:\u003c\/p\u003e\n\u003cp\u003eTIPI for the TI 99\/4a\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWIKI for Installation is here: \u003ca title=\"TIPI PEB WIKI\" href=\"https:\/\/github.com\/jedimatt42\/tipi\/wiki\/tipipeb-installation\"\u003ehttps:\/\/github.com\/jedimatt42\/tipi\/wiki\/tipipeb-installation\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is TIPI?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTIPI is a storage, network, and device solution expansion for the TI-99\/4A home computer and the Myarc Geneve 9640 Family Computer.  It utilizes a Raspberry PI 3\/3+ or Zero-W to interface with the rest of the world\u003c\/p\u003e\n\u003cp\u003eThis is a PEB (peripheral Expansion Box) version called the TIPI-PEB.  You MUST have some kind of RAM expansion of at least 32k installed in your system.  The TIPI_PEB will not function without it.  You also must have a PEB.  I mean, I would think that would be obvious, but . . . \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHistory\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTI hardware creator and programmer Matthew Splett (JediMatt42) created the TIPI so that TI 99 users could have an easy way to emulate disk drives, access the internet, and do a whole host of other things with their beloved machine.  NOTA BENE: JediMatt42 has NOTHING whatsoever to do with these devices.  He has released the design into the wild.  You can build them yourself!.  The Brewing Academy is just offering these pre-built so you can enjoy the goodness without the pain of assembling it.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eTIPI \u0026amp; Cable\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eThis is a fully-assembled and tested TIPI.  It includes a pre-installed cable and is ready for you to connect it.\u003c\/li\u003e\n\u003cli\u003eThere is no case required.  IN FACT, take a look at the pictures: you can mount your Raspberry Pi 3\/3+\/Zero-W ON THE TIPI itself! (Pi will still require an eternal power supply, not included) \u003c\/li\u003e\n\u003cli\u003eIn order to use this, you will NEED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eo   32k RAM expansion of some kind that functions with the PEB\u003c\/p\u003e\n\u003cp\u003eo   Raspberry Pi 3\/3+\/Zero-W\u003c\/p\u003e\n\u003cp\u003eo   16GB (or larger) uSD card with the Proper TIPI image on it\u003c\/p\u003e\n\u003cp\u003eo   TI Peripheral Expansion Box\u003c\/p\u003e\n\u003cp\u003eo   TI 99\/4a (any model)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe TIPI GitHub is a great location for information as well as AtariAge \"TIPI Usage \u0026amp; Support\" Forum.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHIPPING:  Due to its larger size, it needs to go in a much larger box.  As such, shipping is more expensive.\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31641755418726,"sku":"","price":139.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0547.jpg?v=1593028818"},{"product_id":"ultimate-1mb-upgrade-lotharek-jon-fjc-halliday-candle","title":"Ultimate 1MB Upgrade","description":"\u003cp\u003e\u003cspan\u003e      Ultimate is one of the best ATARI 8bit internal upgrades ever, invented by Sebastian Bartkowicz aka Candle`o`Sin.  Installation of this upgrade can take 5 minutes or it can take two hours.  Depends on if your machine is socketed or not.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e     It's easy, it's simple, it's FUN!  However, you are accepting ALL responsibility for anything you do to your machine.  That is VERY much on you.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eI use these primarily for 1088XEL \u0026amp; 1088XLD builds, but you can put them in your XL\/XE machine as well.  \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eThese are the NEWEST 2026 version just released by Lotharek\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAs solder-less as possible (only RW, PHI2, HALT and RESET lines need soldering when MMU and OS rom are socketed) and you can avoid that by using our soon to be available SALLY adapter\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003efully flashable SpartaDOS-X with up to 320kbytes for its purposes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReal Time Clock module for SDX with battery backup and NVRAM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003efully flashable 4 OS ROM slots\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ehardware WRITE PROTECT for the whole Flash array\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003econfigurable memory expansion with 4 modes of operation (disabled, 320k RAMBO, 578k COMPY SHOP, 1088k RAMBO)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ecustomizable BASIC and MISSLE COMMAND slots (also flashable)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ecompatible with all XL\/XE machines (600XL needs 64kB of RAM first)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInside BOX :\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003ehigh quality Ultimate BOARD \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHARTING MMU ADAPTER 20 IDC Female cable\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHARTING OS ROM ADAPTER  28 IDC FEMALE ADAPTER  \u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4pin connection cable\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003efitting items\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNO installation manual is included, but you can reference Lotharek's site \u003ca title=\"\u0026gt;HERE\u0026lt;\" href=\"https:\/\/lotharek.pl\/productdetail.php?id=56\"\u003e\u0026gt;HERE\u0026lt;\u003c\/a\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Ultimate 1MB (2026) by itself","offer_id":44820745551974,"sku":null,"price":110.0,"currency_code":"USD","in_stock":false},{"title":"Ultimate 1MB (2026) w\/ SALLY adapter","offer_id":44820745584742,"sku":null,"price":130.0,"currency_code":"USD","in_stock":false},{"title":"SALLY adapter by itself","offer_id":44820745617510,"sku":null,"price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/files\/IMG_8015.jpg?v=1768616380"},{"product_id":"guardians-storm-over-doria-prototype-reproduction","title":"Prototype Reproduction SET of 8 (or 9)","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction Set \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  Let's be honest, I also wanted to add cool things to my collection as well.  The trick was how could I do both?\u003c\/p\u003e\n\u003cp\u003eI *think* I have come up with a way to do it.  These are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the games themselves:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you want to know more about the individual games, please visit their individual pages (Click on their names, below).\u003c\/p\u003e\n\u003cp\u003eSo, here's the deal.  This includes all eight prototype reproductions and the option for including the \"Diagnostic Cartridge\"  Up to you.  \u003c\/p\u003e\n\u003cp\u003eThe \"\u003cstrong\u003eSet of 8\u003c\/strong\u003e\" includes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/basketbrawl-prototype-reproduction\" title=\"Basketbrawl Prototype for Atari Lynx\"\u003eBasketbrawl\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/battlezone-demo-prototype-reproduction\" title=\"BattleZone Demo for the Atari Lynx\"\u003eBattleZone Demo\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/cyberball-2072-prototype-reproduction\" title=\"Cyberball 2072 Prototype for the Atari Lynx\"\u003eCyberball 2072\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/daemonsgate-prototype-reproduction\" title=\"Daemonsgate Prototype for the Atari Lynx\"\u003eDaemonsgate\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/grid-runner-prototype-reproduction\" title=\"Grid Runner Prototype for the Atari Lynx\"\u003eGrid Runner\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/guardians-storm-over-doria-prototype-reproduction\" title=\"Guardians: Storm Over Doria Prototype for Atari Lynx\"\u003eGuardians: Storm Over Doria\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/pinball-jam-prototype-reproduction\" title=\"Pinball Jam Prototype for Atari Lynx\"\u003ePinball Jam\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/world-class-soccer-prototype-reproduction\" title=\"World Class Soccer Prototype for Atari Lynx\"\u003eWorld Class Soccer\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe \"\u003cstrong\u003eSet of 9\u003c\/strong\u003e\" includes:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/basketbrawl-prototype-reproduction\" title=\"Basketbrawl Prototype for Atari Lynx\" style=\"font-size: 1.4em;\"\u003eBasketbrawl\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/battlezone-demo-prototype-reproduction\" title=\"BattleZone Demo for the Atari Lynx\" style=\"font-size: 1.4em;\"\u003eBattleZone Demo\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/cyberball-2072-prototype-reproduction\" title=\"Cyberball 2072 Prototype for the Atari Lynx\" style=\"font-size: 1.4em;\"\u003eCyberball 2072\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/daemonsgate-prototype-reproduction\" title=\"Daemonsgate Prototype for the Atari Lynx\" style=\"font-size: 1.4em;\"\u003eDaemonsgate\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/grid-runner-prototype-reproduction\" title=\"Grid Runner Prototype for the Atari Lynx\" style=\"font-size: 1.4em;\"\u003eGrid Runner\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/guardians-storm-over-doria-prototype-reproduction\" title=\"Guardians: Storm Over Doria Prototype for Atari Lynx\" style=\"font-size: 1.4em;\"\u003eGuardians: Storm Over Doria\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/pinball-jam-prototype-reproduction\" title=\"Pinball Jam Prototype for Atari Lynx\" style=\"font-size: 1.4em;\"\u003ePinball Jam\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/world-class-soccer-prototype-reproduction\" title=\"World Class Soccer Prototype for Atari Lynx\" style=\"font-size: 1.4em;\"\u003eWorld Class Soccer\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-lynx\/products\/atari-lynx-diagnostic-cartridge-reproduction\" title=\"Diagnostic Cartridge for the Atari Lynx\"\u003eDiagnostic Cartridge\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Set of 8","offer_id":31826562154598,"sku":"","price":200.0,"currency_code":"USD","in_stock":false},{"title":"Set of 9","offer_id":31826562187366,"sku":"","price":225.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/7PEAh.jpg?v=1590537988"},{"product_id":"daemonsgate-prototype-reproduction","title":"Daemonsgate Prototype Reproduction Two Versions","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\n\u003cem\u003eDaemonsgate\u003c\/em\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction TWO VERSIONS \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here: \u003c\/h2\u003e\n\u003cp\u003eIn the past year, I have been lucky enough to come across two sets of Lynx prototypes.  One set was on eBay and the other was from a set of 3.5\" floppy disks that some one gave me when I purchased something else from them.  Both were from \"legitimate\" sources.  A lot of them were just earlier versions of released games.  However some, like \"Ninja Nerd,\" Vindicators,\" \"Eye of the Beholder,\" Daemonsgate,\" and others had never been seen before.  I have recreated cartridges there.  These are sturdy carts made with EPROM save RAM and 3D printed shells.  They look and feel like regular Lynx carts.  We have had the labels professionally designed and--for the most part--professionally printed.  Enjoy!\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThere are TWO versions of BattleZone here:\u003c\/p\u003e\n\u003cp\u003eVERSION 1: \"CES 1991Version \": This is a playable game.  But it is not complete.  You can fight monsters and go around the town.  There is good in-game music and you can definitely see how things are developing.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVERSION 2: \"CES 1992 Version\" version:  This was found on the floppy disks.  It is a VERY playable game.  There are shops, you can go loot people's houses, there is more of an interface that is finished.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance. Here is a video of them (and others) https:\/\/www.youtube.com\/watch?v=HPeXvapioPs\u0026amp;t=35s\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"CES 1991","offer_id":39260217802854,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"CES 1992","offer_id":39260217835622,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0310.jpg?v=1615249487"},{"product_id":"basketbrawl-prototype-reproduction","title":"BasketBrawl  Prototype Reproduction TWO VERSIONS","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\n\u003cem\u003eBasketbrawl\u003c\/em\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction TWO VERSIONS \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here: \u003c\/h2\u003e\n\u003cp\u003eIn the past year, I have been lucky enough to come across two sets of Lynx prototypes.  One set was on eBay and the other was from a set of 3.5\" floppy disks that some one gave me when I purchased something else from them.  Both were from \"legitimate\" sources.  A lot of them were just earlier versions of released games.  However some, like \"Ninja Nerd,\" Vindicators,\" \"Eye of the Beholder,\" Daemonsgate,\" and others had never been seen before.  I have recreated cartridges there.  These are sturdy carts made with EPROM save RAM and 3D printed shells.  They look and feel like regular Lynx carts.  We have had the labels professionally designed and--for the most part--professionally printed.  Enjoy!\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThere are TWO versions of Basketbrawl here:\u003c\/p\u003e\n\u003cp\u003eVERSION 1: \"CES Version \":This is very playable.  You can only select a few characters and one of two teams, but it is playable.\u003c\/p\u003e\n\u003cp\u003eThe original Prototype was labelled \"Basketbrawl \/\/ CES \/\/ 1991\"\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVERSION 2: \"BASKETBR.05\" version:  This was found on the floppy disks.  It is a MUCH more playable game.  There are multiple players and teams.  There is a progression to the game,  Not quite the retail version, but definitely playable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance. Here is a video of them (and others) https:\/\/www.youtube.com\/watch?v=HPeXvapioPs\u0026amp;t=35s\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"CES Version","offer_id":39260221243494,"sku":"","price":25.0,"currency_code":"USD","in_stock":false},{"title":"BASKETBR.05","offer_id":39260221276262,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0304.jpg?v=1615249453"},{"product_id":"battlezone-demo-prototype-reproduction","title":"\"BattleZone Demo\" Prototype (Two Versions)","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"BattleZone Demo\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction - TWO VERSIONS\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here: \u003c\/h2\u003e\n\u003cp\u003eIn the past year, I have been lucky enough to come across two sets of Lynx prototypes.  One set was on eBay and the other was from a set of 3.5\" floppy disks that some one gave me when I purchased something else from them.  Both were from \"legitimate\" sources.  A lot of them were just earlier versions of released games.  However some, like \"Ninja Nerd,\" Vindicators,\" \"Eye of the Beholder,\" Daemonsgate,\" and others had never been seen before.  I have recreated cartridges there.  These are sturdy carts made with EPROM save RAM and 3D printed shells.  They look and feel like regular Lynx carts.  We have had the labels professionally designed and--for the most part--professionally printed.  Enjoy!\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThere are TWO versions of BattleZone here:\u003c\/p\u003e\n\u003cp\u003eVERSION 1: \"CES Version\": This is a proof of concept.  It lulls you into thinking there is going to be something playable and then SMACK, no, there is not. No, I could be wrong, maybe someone just needs to play with it more.  I dunno.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe original prototype 's label was lost to the vagaries of time.\u003c\/p\u003e\n\u003cp\u003eVERSION 2: \"\u003ca href=\"https:\/\/www.thebrewingacademy.net\/BATTLEZO.02\" title=\"BattleZone Demo Prototype ROM for Atari Lynx\"\u003eBATTLEZO.02\u003c\/a\u003e\" version:  This was found on the floppy disks.  It is a VERY playable game.  There are enemy tanks that shoot and can be shot.  It keeps score.   It does NOT comlynx.\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance. Here is a video of them (and others) https:\/\/www.youtube.com\/watch?v=HPeXvapioPs\u0026amp;t=35s\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"CES Version","offer_id":39260208529510,"sku":"","price":20.0,"currency_code":"USD","in_stock":false},{"title":"BATTLEZO.02","offer_id":39260208562278,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0309.jpg?v=1615249556"},{"product_id":"world-class-soccer-prototype-reproduction","title":"World Class Soccer Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWorld Class Soccer \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  Let's be honest, I also wanted to add cool things to my collection as well.  The trick was how could I do both?\u003c\/p\u003e\n\u003cp\u003eI *think* I have come up with a way to do it.  These are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is very playable.  You can do slide tackles and change players and choose any team in the world (yeah, let's be clear, I think you are selecting a name and a flag, but whatever).  Now, it might be better if I actually understood Soccer\/Football.  I am not trying to insult the game, I just don't know.  It's akin to Hockey for me, I know LOTS of people love the game, I can root for a team, but beyond goals, you got me.  All that being said, this looks like it is fairly complete.\u003c\/p\u003e\n\u003cp\u003eThe original prototype 's label said \"WCLSS SOCCER \/\/ CES \/\/ ATARI 1992\"\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31826276122726,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0449.jpg?v=1590534361"},{"product_id":"cyberball-2072-prototype-reproduction","title":"Cyberball 2072 Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWorld Class Soccer \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  Let's be honest, I also wanted to add cool things to my collection as well.  The trick was how could I do both?\u003c\/p\u003e\n\u003cp\u003eI *think* I have come up with a way to do it.  These are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is very playable.  There are some differences in graphics from the retail version, but it has been so long since I played the retail version, that I will have to pull it out to verify.\u003c\/p\u003e\n\u003cp\u003eThe original prototype 's label said has been lost to the vagaries of time, but did say \"Cyberball 2072\" and there was another sticker that said \"Return to Juli Wade Atari Corp\"\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31826295685222,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0447.jpg?v=1590534639"},{"product_id":"grid-runner-prototype-reproduction","title":"Grid Runner Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eGrid Runner \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  Let's be honest, I also wanted to add cool things to my collection as well.  The trick was how could I do both?\u003c\/p\u003e\n\u003cp\u003eI *think* I have come up with a way to do it.  These are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is is a **little** better than BattleZone, but not by much.  It is definitely the front end for a game called \"Grid Runner\" and you can play it . . . to a certain extent.  I mean you can play something more than the BZ demo, but that's a low bar, really.  Again, perhaps there is something there I have no grabbed on to in my brief examination.\u003c\/p\u003e\n\u003cp\u003eThe original prototype 's label said has been lost to the vagaries of time, someone has hand written \"Grid Runner\" on a label of the usual Atari Prototype size.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance. BTW, the label on this cartridge is the opening screenshot when turning the game on.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31826302435430,"sku":"","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0446.jpg?v=1590534913"},{"product_id":"pinball-jam-prototype-reproduction","title":"Pinball Jam Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePinball Jam \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  Let's be honest, I also wanted to add cool things to my collection as well.  The trick was how could I do both?\u003c\/p\u003e\n\u003cp\u003eI *think* I have come up with a way to do it.  These are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is is very playable.  However, it is only one table (Elvira Party Monster).  The splash screen is just the words \"Pinball Jam.\"  The music is . . . odd, I swear it reminds me of Paperboy or Scrapyard Dog and there is not a lot of it so it repeats CONSTANTLY.\u003c\/p\u003e\n\u003cp\u003eThe original prototype 's label said \"Pinball Jam for CES Atari 1991\"\u003c\/p\u003e\n\u003cp\u003eI will post screenshots and videos as soon as I have a chance. \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31826317836390,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0445.jpg?v=1590535141"},{"product_id":"atari-lynx-diagnostic-cartridge-reproduction","title":"Atari Lynx Diagnostic Cartridge Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003cp\u003eThis is a little diagnostic program out of Atari Japan (or so it says) to help you figure out some problems with your Lynx. I he power on screen and menu say \"Lynx II\" but it works just fine on a Lynx I.  The cartridge tests the following:\u003c\/p\u003e\n\u003cp\u003eSystem \u003c\/p\u003e\n\u003cp\u003eLCD\u003c\/p\u003e\n\u003cp\u003eJoystick (tests all the buttons)\u003c\/p\u003e\n\u003cp\u003eSpeaker\u003c\/p\u003e\n\u003cp\u003eStereo\u003c\/p\u003e\n\u003cp\u003eComlynx (this is \"X\"d out)  As much as I would like to tell you that if you buy two of these, you could test out ComLynx . . . that does not appear to work.  I tried.  Maybe I am not doing something, but I do have 30 years experience of powering on Lynxes correctly to get Comlynx to work. ;-)\u003c\/p\u003e\n\u003cp\u003eAlso, if you press Option 2, it will tell you how your power is configured and what revision of Mikey you have!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31826341822566,"sku":"","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0452.jpg?v=1590536634"},{"product_id":"guardians-storm-over-doria-prototype-reproduction-1","title":"Guardians: Storm Over Doria Prototype Repro (CES93)","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ci style=\"color: #000000;\"\u003eGuardians: \u003c\/i\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e\u003cspan style=\"caret-color: #000000;\"\u003e\u003ci\u003eStorm\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ci style=\"color: #000000;\"\u003e Over Doria \u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #362121;\"\u003ePrototype\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #362121;\"\u003e Reproduction CES '93 version\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  Let's be honest, I also wanted to add cool things to my collection as well.  The trick was how could I do both?\u003c\/p\u003e\n\u003cp\u003eI *think* I have come up with a way to do it.  These are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003e There is the definite beginning of a game here.  You can select a character.  You can enter a dungeon and there be monsters there! (They cannot hurt you and you cannot hurt them).  You can roam city streets AND enter into **A** shop.  (You cannot buy anything. You can interact with the shopkeep, though) You can talk to the King and get sent on a quest! (You cannot complete that quest, you have to guess where the dungeon is and yeah).  It LOOKS beautiful and plays fluidly.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"1280\" height=\"720\" src=\"https:\/\/www.youtube.com\/embed\/DUOEoPkJS2k\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eThe label on the original prototype said \"Guardians \/\/ (Telegames)\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe picture on the label is a screenshot of the power on screen.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":31826592104550,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/decfba88-2415-4d77-84ff-40f0209ae519_a85a203d-0819-4932-bffe-f706467aa6b4.png?v=1591164292"},{"product_id":"2364-to-27xxx-eprom-adapter","title":"2364 to 27XXX EPROM adapter!","description":"\u003cp\u003eSo, you want to put rev C BASIC into your XL, but you can't find an original chip?  This will do it for you! on GitHub, SukkoPera (Giorgioggi) created a design that lets you put an 2764 or 27128 or 27256 or even a 27512 (and their equivalent CMOS variants or even NON-erasable varieties) inside of a 24 pin 2364 slot.  You can add a switch and select between various 8k ROM files!  The sky is the limit (okay, well, 8 is the limit and that is with a 27512)!  You can, of course, make your own, but we have created them here for you!\u003c\/p\u003e\n\u003cp\u003eIf you have the ability to burn your own 27C64 or 2764 PROM, then all you do is drop it in this and drop the whole thing into your BASIC socket.  If you do not have the ability to burn an EPROM, we will do it for you.  Select: \u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-800-xl-xe-xel-xld\/products\/2364-to-27xxx-eprom-adapter?variant=39937780318310\" title=\"Burned EPROM\"\u003eTHIS ITEM\u003c\/a\u003e and then send us the file.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf your BASIC chip (24 pin just below the SIO) is socketed, then you will have to de-solder it and install a socket.  If it is socketed, then BLAM!  drop and go!\u003c\/p\u003e\n\u003cp\u003eIf you do NOT have a PROM or a Burner, just let us know what you want burned on the chip and we will make it happen.\u003c\/p\u003e\n\u003cp\u003eThis comes shipped configured for a 2764.  If you would like to change it, here are the specifications:\u003c\/p\u003e\n\u003cp\u003eThree 0805 SMD resistors must be soldered to the bottom side of the board, according to the following table:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e(E)EPROM\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e# of images\u003c\/th\u003e\n\u003cth\u003eR1\u003c\/th\u003e\n\u003cth\u003eR2\u003c\/th\u003e\n\u003cth\u003eR3\u003c\/th\u003e\n\u003cth\u003eSwitchable pads\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2764\u003c\/td\u003e\n\u003ctd\u003e8 KB\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27128\u003c\/td\u003e\n\u003ctd\u003e16 KB\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003eA13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27256\u003c\/td\u003e\n\u003ctd\u003e32 KB\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003eA13, A14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27512*\u003c\/td\u003e\n\u003ctd\u003e64 KB\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003eA13, A14, A15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Assembled \u0026 Tested Board","offer_id":31991985504358,"sku":"","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Assembled \u0026 Tested board w\/ Atari BASIC rev. C installed","offer_id":31991985537126,"sku":"","price":29.99,"currency_code":"USD","in_stock":false},{"title":"Assembled \u0026 Tested Board w\/ 1 8k ROM image installed","offer_id":31991985569894,"sku":"","price":34.99,"currency_code":"USD","in_stock":false},{"title":"27XXX DIY Kit","offer_id":31991985602662,"sku":"","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/6f6d581f-2cd5-43c6-b6dc-a82643ce96c5.png?v=1595631887"},{"product_id":"2364-to-27xxx-adapter","title":"2364 to 27XXX adapter","description":"\u003cp\u003eNeed to put a new ROM in an old 1541 or Vic-20 or Commodore 64? This will do it for you!\u003c\/p\u003e\n\u003cp\u003eOn GitHub, SukkoPera (Giorgioggi) created a design that lets you put an 2764 or 27128 or 27256 or even a 27512 (and their equivalent CMOS variants or even NON-erasable varieties) inside of a 24 pin 2364 slot.  You can add a switch and select between various 8k ROM files!  The sky is the limit (okay, well, 8 is the limit and that is with a 27512)!  You can, of course, make your own, but we have created them here for you!\u003c\/p\u003e\n\u003cp\u003eIf you have the ability to burn your own 27C64 or 2764 PROM, then all you do is drop it in this and drop the whole thing into your socket.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf your chip is NOT socketed, then you will have to de-solder it and install a socket.  If it is socketed, then BLAM!  drop and go!\u003c\/p\u003e\n\u003cp\u003eIf you do NOT have a PROM or a Burner, just let us know what you want burned on the chip and we will make it happen.\u003c\/p\u003e\n\u003cp\u003eThis comes shipped configured for a 2764.  If you would like to change it, here are the specifications:\u003c\/p\u003e\n\u003cp\u003eThree 0805 SMD resistors must be soldered to the bottom side of the board, according to the following table:\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e(E)EPROM\u003c\/th\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003cth\u003e# of images\u003c\/th\u003e\n\u003cth\u003eR1\u003c\/th\u003e\n\u003cth\u003eR2\u003c\/th\u003e\n\u003cth\u003eR3\u003c\/th\u003e\n\u003cth\u003eSwitchable pads\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2764\u003c\/td\u003e\n\u003ctd\u003e8 KB\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27128\u003c\/td\u003e\n\u003ctd\u003e16 KB\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003eA13\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27256\u003c\/td\u003e\n\u003ctd\u003e32 KB\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e0R\u003c\/td\u003e\n\u003ctd\u003eA13, A14\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e27512*\u003c\/td\u003e\n\u003ctd\u003e64 KB\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003e10k\u003c\/td\u003e\n\u003ctd\u003eA13, A14, A15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"The Brewing Academy","offers":[{"title":"Tested \u0026 Assembled Board","offer_id":31992581226598,"sku":"","price":9.99,"currency_code":"USD","in_stock":false},{"title":"Tested \u0026 Assembled board with chip","offer_id":31992581259366,"sku":"","price":19.99,"currency_code":"USD","in_stock":false},{"title":"Tested \u0026 Assembled board with programmed chip","offer_id":45301721563238,"sku":null,"price":34.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0631.jpg?v=1595658669"},{"product_id":"bios-upgrade-with-asteroids","title":"BIOS Upgrade (with Asteroids)","description":"\u003cp\u003eWhat is it?\u003c\/p\u003e\n\u003cp\u003eThe Atari 7800 had two different BIOS chips (Operating Systems): NTSC and PAL.\u003cspan\u003e  \u003c\/span\u003eThey were very similar except for the fact that the PAL version did not have a splash screen like the NTSC did.\u003cspan\u003e  \u003c\/span\u003eThe PAL version also had built-in Asteroids!\u003c\/p\u003e\n\u003cp\u003eThis will still let you play ALL US releases on a US machine.  However, it will only let you run a few PAL releases on an NTSC machine. So, do not expect to run every PAL game on your NTSC machine (For example, Moto Psycho--the best motorcycle riding game in all of human history--will NOT run on an NTSC machine even with this BIOS change.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSkills Required\u003c\/strong\u003e:\u003cspan\u003e  \u003c\/span\u003eYou must be able to DE-SOLDER as well as cut traces on the motherboard.\u003cspan\u003e  \u003c\/span\u003eIt \u003cem\u003eshould\u003c\/em\u003e go without saying that you also need to be able to solder.\u003cspan\u003e  \u003c\/span\u003eThis procedure IS reversible (to a certain extent), but your machine will retain signs that it was once modified.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32028720922726,"sku":"","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/7800OSUpgrade.png?v=1597269681"},{"product_id":"tbas-bob-12731","title":"TBA's BOB-12731","description":"\u003cdiv class=\"page\" title=\"Page 1\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"section\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"layoutArea\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"column\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPROM, and a 28-pin SSOP package this is a serious little chip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e• Implements full v2.0 USB protocol\u003cbr data-mce-fragment=\"1\"\u003e• Needs no external crystal\u003cbr data-mce-fragment=\"1\"\u003e• Internal EEPROM for device ID and Product Description strings • Royalty-Free Driver support for Windows, Linux, and Mac OSX\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32084020035686,"sku":"","price":12.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/8fe696a9-0abc-4e69-84c8-84b7b93f1860.png?v=1600209862"},{"product_id":"s-drive-max-sd-card-8gb-usd","title":"S-Drive MAX (\u0026 FujiNet) SD Card (8gb uSD)","description":"\u003cp\u003eWe include these with all of our S-Drive MAX devices \u003ca href=\"https:\/\/thebrewingacademy.com\/collections\/atari-800-xl-xe-xel-xld\/products\/atari-sdrive-max\" title=\"S-Drive MAX\"\u003e(Found here)\u003c\/a\u003e but if you made your own or lost your original, here is one for you.  It has hundreds and hundreds of XEX, CAS, ATR, and ATX files for your use and amusement!\u003c\/p\u003e\n\u003cp\u003eThis will also work wonderfully in your new FujiNet. All files except for the CAS files will work right now on the FujiNet.  Remember, the CAS ability is\u003cspan style=\"text-decoration: underline;\"\u003e\u003cem\u003e coming soon\u003c\/em\u003e\u003c\/span\u003e to FujiNet and when it does, you will already have 100s of files to load that way.\u003c\/p\u003e\n\u003cp\u003eEnjoy!\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32086233186406,"sku":"","price":25.0,"currency_code":"USD","in_stock":false}]},{"product_id":"vindicators-prototype-reproduction","title":"\"Vindicators\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Vindicators\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer I think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey or black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is a completely playable level.  You can choose the starting level and it does vary the MOBs and the design, but, that's it.  Ince you kill all of the tanks and turrets, no key appears.  There is no door to exit.  You are done.  It's fun while it lasts!\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This game **WILL** comlynx for up to TWO player fun!  (To play two players, you will need two Lynxes (Lynxen?), two Vindicators cartridges, and a ComLynx cable.  Both players need to power on within 7 seconds of each other (Standard ComLynx protocols).\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/NS1O8KWBARw?t=1509\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Single Player Action-One Copy","offer_id":32118071722086,"sku":"","price":35.0,"currency_code":"USD","in_stock":false},{"title":"Two Player Action-Two copies","offer_id":32118071754854,"sku":"","price":65.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0006.jpg?v=1601710704"},{"product_id":"rolling-thunder-prototype-reproduction","title":"\"Rolling Thunder\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Rolling Thunder\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT!\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is a somewhat playable SHORT level.  It is mainly a proof of concept, I think.  The graphics are kind of rough, but you can fire, kill MOBs, and move about the level.\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This game will NOT ComLynx.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/NS1O8KWBARw?t=1303\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32118072115302,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0008.jpg?v=1601710560"},{"product_id":"geoduel-prototype-reproduction","title":"\"GeoDuel\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"GeoDuel\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is very playable.  However, I have NO idea what the rules are.  It seems like some kind of \"Tron Light Cycle\" games but not sure of the scoring or the strategy beyond, y'know, \"The Game Grid.\"\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCOMLYNX:  This game **WILL** comlynx for up to at least three player fun! As soon as I get all of my Lynxen in one place, I will further the testing.  (To play two or more players, you will need two or more Lynxes (Lynxen?), two or more GeoDuel cartridges, and n-1 ComLynx cables for every n players.  (2 players=1 cable, 3 players=2 cables, etc).  All players need to power on within 7 seconds of each other (Standard ComLynx protocols).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGameplay video: https:\/\/youtu.be\/NS1O8KWBARw?t=756 \u003c\/span\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"One Player Action-One copy","offer_id":32118073688166,"sku":"","price":30.0,"currency_code":"USD","in_stock":false},{"title":"Two Player Action-Two Copies","offer_id":32118073720934,"sku":"","price":55.0,"currency_code":"USD","in_stock":false},{"title":"MultiPlayer Action-Three copies","offer_id":32118073753702,"sku":"","price":80.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0009.jpg?v=1603143070"},{"product_id":"spacewar-prototype-reproduction","title":"\"SpaceWar\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"SpaceWar\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! (Note: the shells will be grey-dark grey, not black)\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is very playable.  However, I have NO idea what the rules are. It seems like it is similar to WarBirds except, y'know, in SPACE!  There is a tendency for the game to crash for the player that kills another player.  Karmic justice? Mayhems!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCOMLYNX:  This game **WILL** comlynx for up to at least three player fun! As soon as I get all of my Lynxen in one place, I will further the testing.  (To play two or more players, you will need two or more Lynxes (Lynxen?), two or more GeoDuel cartridges, and n-1 ComLynx cables for every n players.  (2 players=1 cable, 3 players=2 cables, etc).  All players need to power on within 7 seconds of each other (Standard ComLynx protocols).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGameplay video: https:\/\/youtu.be\/NS1O8KWBARw?t=1416\u003c\/span\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"One Player Action-One copy","offer_id":32118075555942,"sku":null,"price":30.0,"currency_code":"USD","in_stock":false},{"title":"Two Player Action-Two Copies","offer_id":32118075588710,"sku":null,"price":55.0,"currency_code":"USD","in_stock":false},{"title":"MultiPlayer Action-Three copies","offer_id":32118075621478,"sku":null,"price":80.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0011.jpg?v=1601711221"},{"product_id":"wolfman-prototype-reproduction","title":"\"Wolfman\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Wolfman\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is NOT a game.  It is a very cool kiosk advertisement kind of thing.  I think it looks cool and reminds me off their Dracula game.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This game will NOT ComLynx.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/NS1O8KWBARw?t=1693\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32118078177382,"sku":"","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0004.jpg?v=1601710906"},{"product_id":"friendly-prototype-reproduction","title":"\"Friendly\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Friendly\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games \"Batch 2\" for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is NOT SAFE FOR WORK!  In fact, if you are not of legal age to possess adult materials, then do NOT BUY THIS.  If you cannot get past the age restriction of the YouTube video linked below, then you cannot buy this.\u003c\/p\u003e\n\u003cp\u003e It really is not all that much to it, but meh it was there and somebody designed it back in the day.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eGameplay video: https:\/\/youtu.be\/2GlFWf7Gwuk\u003c\/span\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145512169574,"sku":"","price":27.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0040.jpg?v=1603143207"},{"product_id":"cabal-prototype-reproduction","title":"\"Cabal\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Cabal\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eYou can fine the original ROM file \u003ca href=\"https:\/\/www.thebrewingacademy.net\/CABAL.02\" title=\"Cabal Prototype Demo ROM for Atari Lynx\"\u003eHERE\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis is NOT a game.  It is a collection of screens of what could have been.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This cartridge will NOT ComLynx.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145520984166,"sku":"","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0046.jpg?v=1603144783"},{"product_id":"ram-cart-prototype-reproduction","title":"\"RAM Cart\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"RAM Cart\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is NOT a game.  It is a RAM editor of some kind.  I have no real idea how it works.  Perhaps it needs the Handy?  Does it need the physical Lynx dev board? If anyone figures it out, let us know!\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This cartridge will NOT ComLynx.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145523900518,"sku":"","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0041.jpg?v=1603145648"},{"product_id":"poker-prototype-reproduction","title":"\"Poker\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Poker\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is a 5-card poker game.  It is the weirdest one I have seen, though.  IIRC, there was a Lynx Poker \"kiosk\" unit that was discovered a while back.  I **think** this was the program\/game running in it.  Watch the video for particulars (and hip to operate it if you do not read what I think is French.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This cartridge will NOT ComLynx.  However, you will NEED a ComLynx cable (or maybe just a 3.5mm plug?) for it to fully operate.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145530880102,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0043_8e67241d-6a8e-4d9e-8a9a-0b1baad05a8c.jpg?v=1603146010"},{"product_id":"copy-of-poker-prototype-reproduction","title":"\"Marlboro Go!\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Marlboro Go!\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis prototype has been around for a while now.  It was included a a marketing program for Marlboro Cigarettes.  You could collect points and mail them in for a red Marlboro Lynx.  The game was available on a hand-made circuit board in very limited quantities.\u003c\/p\u003e\n\u003cp\u003eYou can race around ONE track and do jumps and wheelies.  Not much else to do.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145536974950,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0042_dc71270a-3113-492a-ba14-1a760f97c16d.jpg?v=1603146334"},{"product_id":"pounce-prototype-reproduction","title":"\"Pounce!\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Pounce!\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThere was a finished game by this name out there but I do not know how similar it is to this prototype.  You can play this.  There seems to be a complete level here.  Bu8t, I have not taken the time to finish it in depth.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145544675430,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0045_ec48b53e-6328-41df-83fe-a7303abb4b18.jpg?v=1603146405"},{"product_id":"loopz-prototype-reproduction","title":"\"Loopz\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Loopz\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is a collection of puzzle games that is like a combination between Tetris and Pipe Dreams.  If you know those games, you pretty much know exactly what this is.  Sort of.  If not, well, google it and then you can get the gist.  You should watch BOTH videos I have up about these \"Batch 2\" prototypes because there is different gameplay in each.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIT IS ALSO 2-player ComLynx!!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNewer Gameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e\n\u003cp\u003eOlder Gameplay video: https:\/\/youtu.be\/NS1O8KWBARw\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"One-player goodness","offer_id":32145555619942,"sku":"","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Two-Play ComLynx Action!","offer_id":32145555652710,"sku":"","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0044.jpg?v=1603147156"},{"product_id":"ninja-nerd-prototype-reproduction","title":"\"Ninja Nerd\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Ninja Nerd\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is a platformer.  There are specific details about which levels are finished completely and which are not (It states five levels!)  To see it, you just let the game scroll through and tell you the specifics.  I have been told this became \"Fat Bobby,\" but these are two VERY different games.  The only similarity I see is that both are platformers and they were coded at the same studio.  You be the judge\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This cartridge will NOT ComLynx.  \u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32145568825446,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0047.jpg?v=1603149636"},{"product_id":"full-court-press-prototype-reproduction","title":"\"Full Court Press\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Full Court Press\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is **kind of** a game.  You can select teams and options and such, but all you do is run up and down the court with the ball.  You cannot shoot, change characters, or much of anything.  I will have a video up soon.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  This cartridge will NOT ComLynx.\u003c\/p\u003e\n\u003cp\u003eGameplay video: https:\/\/youtu.be\/HRqbYLxaqZM\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32169978462310,"sku":"","price":27.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0063.jpg?v=1605133316"},{"product_id":"guardians-storm-over-doria-prototype-guardian-02","title":"Guardians: Storm Over Doria Prototype \"GUARDIAN.02\"","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ci style=\"color: #000000;\"\u003eGuardians: \u003c\/i\u003e\u003cspan style=\"color: #000000;\" color=\"#000000\"\u003e\u003cspan style=\"caret-color: #000000;\"\u003e\u003ci\u003eStorm\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ci style=\"color: #000000;\"\u003e Over Doria \u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #362121;\"\u003ePrototype\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #362121;\"\u003e Reproduction GUARDIAN.02 version\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThere is the definite game here.  You can select a character.  You can enter a dungeon and there be monsters there!  You can kill them and they can kill you! Also, death resets the game.  You have hitpoints. You can roam city streets AND enter into at least 2 shops.  You can buy items. You can interact with the shopkeep. You can talk to the King and get sent on a quest! You have to find an NPC to get a map to the dungeon.  It LOOKS beautiful and plays fluidly. This is the MOST complete version.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/youtu.be\/OiW9z4RWQnI\" title=\"Guardians Storm Over Doria Atari Lynx Prototypes\"\u003eVideo of gameplay\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe picture on the label is a screenshot of the power on screen.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32188243247206,"sku":"","price":35.0,"currency_code":"USD","in_stock":true}]},{"product_id":"guardians-storm-over-doria-prototype-quest-01-version","title":"Guardians: Storm Over Doria Prototype \"QUEST.01\" version","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\n\u003cspan\u003e\u003cspan\u003e\u003ci style=\"color: #000000;\"\u003eGuardians: \u003c\/i\u003e\u003cspan style=\"color: #000000;\" color=\"#000000\"\u003e\u003cspan style=\"caret-color: #000000;\"\u003e\u003ci\u003eStorm\u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ci style=\"color: #000000;\"\u003e Over Doria \u003c\/i\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #362121;\"\u003ePrototype\u003c\/span\u003e\u003cstrong\u003e\u003cspan style=\"color: #362121;\"\u003e Reproduction QUEST.01 version\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThere is the definite start of a game here.  You can select a character.  You can enter a dungeon and there be monsters there!  You can kill them but they cannot kill you!  You can roam city streets AND enter into at least 2 shops.  You canNOT buy items. You can interact with the shopkeep. You can talk to the King and get sent on a quest! You have to find an NPC to get a map to the dungeon.  It LOOKS beautiful and plays fluidly. This is the very similar to the CES '93 version.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003ca href=\"https:\/\/youtu.be\/OiW9z4RWQnI\" title=\"Guardians Storm Over Doria Atari Lynx Prototypes\"\u003eVideo of gameplay\u003c\/a\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe picture on the label is a screenshot of the power on screen.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":32188259893350,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}]},{"product_id":"compactflash-cards-for-xel-xld-cf2xxx-incognito-side2","title":"CompactFlash cards for XEL\/XLD\/CF2XXX\/Incognito\/SiDE2","description":"\u003cp\u003eFolks,\u003c\/p\u003e\n\u003cp\u003eI have been getting requests for some known good CompactFlash cards for the various hard drive interfaces out there.  As such, we are offering them here for your purchase.  They come in various sizes, but the all have the following in common:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eFully Formatted and partitioned with the latest version of FDISK for use on the A8\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003ePartitions have been formatted with SDX\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003ePartitions have been set up as D5-DH, DJ-DO (\"oh,\" not zero).  I skip DI (D9) because that is the default RAMDisk.\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eThey have all been tested in XLD\/XEL, Incognito, CF2XXX and SiDE2.  If you want to make sure they work with whatever you want them to work in, please send a note along\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eNOTE: if you are using two simultaneously, you MUST be using F-series chips on your  interface.\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ch6\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eThey are 15MB\/s or slower!\u003c\/span\u003e\u003c\/h6\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eLet us know if you have questions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNOTE: Your CompactFlash card may vary in \u003c\/span\u003emanufacturer, but it will be tested and working.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"2GB","offer_id":32210746835046,"sku":"","price":50.0,"currency_code":"USD","in_stock":false},{"title":"4GB","offer_id":32210746867814,"sku":"","price":52.5,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0613_f9b02925-f976-4617-adaa-01c806d6393a.jpg?v=1623968173"},{"product_id":"fujinet-case-only","title":"FujiNet CASE ONLY","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong\u003eCase options\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe cases are the 800 beige, the XL beige or the XE grey.  As I said, they are the same colors used on the website.  I will replace these as soon as I get the ones off of the printer that are printing this weekend.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFolks, some people wanted a different case or ordered it without a case and now want one, so here they are.  This is ONLY for a case and four screws!\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"800","offer_id":32243424755814,"sku":"","price":10.0,"currency_code":"USD","in_stock":false},{"title":"XL","offer_id":32243424788582,"sku":"","price":10.0,"currency_code":"USD","in_stock":false},{"title":"XE","offer_id":32243424821350,"sku":"","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/7a4f7fb2-6b1f-4665-b254-5dcd0e57977d_226ec6d2-199a-4531-a907-f9b9481cc117.png?v=1608139778"},{"product_id":"eye-of-the-beholder-prototype-reproduction","title":"\"Eye of the Beholder\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Eye of the Beholder\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is definitely playable.  It allegedly has game save functions AND there is the appropriate save RAM on the cartridge we made, but it does not seem to save.\u003c\/p\u003e\n\u003cp\u003eI cannot overstate this: There is a LOT here to play with.\u003c\/p\u003e\n\u003cp\u003ehttps:\/\/www.youtube.com\/watch?v=HPeXvapioPs\u0026amp;t=35s\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":39260234743910,"sku":"","price":35.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0305.jpg?v=1615249392"},{"product_id":"hyperdrome-prototype-reproduction","title":"\"Hyperdrome\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"HyperDrome\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is definitely playable.  It is a full-fledged game, but not quite complete.\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":39260237201510,"sku":"","price":30.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0307.jpg?v=1615249365"},{"product_id":"scopetrex-a-vectrex-for-your-oscilloscope","title":"SCOPETREX! A Vectrex for your Oscilloscope! (version 1.1)","description":"\u003cmeta charset=\"UTF-8\"\u003e\n\u003ch4 data-mce-fragment=\"1\"\u003eWe now offer version 1.1 of the motherboard as well as the controller motherboard.  Check them out!\u003c\/h4\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eVector Gaming on Your Oscilloscope!\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eHave you ever wanted to buy a Vectrex, but you can't afford the high prices on auction sites? Do you already have a hoard of Vectrexes, but want \u003cem data-mce-fragment=\"1\"\u003eanother\u003c\/em\u003e one? Well now you can build your own!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/github.com\/schlae\/scopetrex\/blob\/master\/images\/scopetrex.png\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/github.com\/schlae\/scopetrex\/blob\/master\/images\/scopetrex.png\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/github.com\/schlae\/scopetrex\/raw\/master\/images\/scopetrex.png\" alt=\"SCOPETREX photo\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/github.com\/schlae\/scopetrex\/raw\/master\/images\/scopetrex.png\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SCOPETREX is basically a Vectrex on a single board without a monitor. To play games, you have to connect it to an oscilloscope or an XY monitor.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis board is not just an exact clone of a Vectrex; it makes a number of improvements over the original.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSingle +5V power supply, only 500mA (minimum)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConfigurable X and Y size and polarity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eConfigurable brightness and video blanking polarity\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWorks with a 68A09\/68B09 or the more common 68A09E\/68B09E\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWorks with the AY-3-8912 sound chip or the cheaper AY-3-8910\/YM2149F\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCustom controller board which is also compatible with the Vectrex\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCool art on the board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAll of the components are readily available, either from Mouser or from various brokers in China. The bills of materials include Mouser part numbers.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe sell two versions: a bare motherboard and a fully assembled and tested version.  You can also download everything you need from here:  https:\/\/github.com\/schlae\/scopetrex\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Bare Motherboard","offer_id":39261759111270,"sku":"","price":15.0,"currency_code":"USD","in_stock":false},{"title":"Fully Assembled \u0026 Tested","offer_id":39261759144038,"sku":"","price":200.0,"currency_code":"USD","in_stock":false},{"title":"Scopetrex! Controller PCB","offer_id":39989985509478,"sku":"","price":10.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0314.jpg?v=1615398809"},{"product_id":"tbas-8gb-usd-adapter-card-for-the-side3-or-sideb-you-be-the-judge","title":"TBA's 8gb uSD \u0026 adapter Card for the Side3 (or SideB, you be the judge!)","description":"\u003cp\u003eThis is a curated collection of ROM, CAR, \u0026amp; XEX files for the Atari 400\/800\/XL\/XE \u0026amp; 1088XEL\/XLD series of computers.  It is designed to be used with the \u003cstrong\u003eSide 3 cartridge\u003c\/strong\u003e sold by \u003cem\u003eThe Brewing Academy.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eIt has been formatted with the following partitions:\u003c\/p\u003e\n\u003cp\u003eAPT:  4 Active Atari partitions (E:, F: G: H:) with room to create more. SDX Toolkit files already copies into directories.\u003c\/p\u003e\n\u003cp\u003eFAT 32: 2G of FAT32 for the [L]oader\u003c\/p\u003e\n\u003cp\u003eFAT16: Two active partitions (N: \u0026amp; O:) You need to use FAT.SYS driver in SDX to access these.  This means you can copy from your computer and use them directly in SDX!\u003c\/p\u003e\n\u003cp\u003e4GB of free space.  Use your computer to expand any of the partitions OR Create a whole new one!\u003c\/p\u003e\n\u003cp\u003eYour SD card may be different than the one in the picture, but it will contain the exact same files!\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":39266560442470,"sku":"","price":27.5,"currency_code":"USD","in_stock":true}]},{"product_id":"raiden-prototype-reproduction","title":"\"RaiDen\" Prototype Reproduction","description":"\u003ch3\u003e\u003cem\u003e\u003cspan\u003e\u003cstrong\u003e\u003cu\u003eNOTA Bene:  I can no longer guarantee these will work on the Analogue Pocket.  They \u003c\/u\u003e\u003cem style=\"text-decoration: underline;\"\u003eshould\u003c\/em\u003e\u003cu\u003e, but Eye of the Beholder just crashes out.  I have a message into Analogue about but no guarantees.  Starting 01 Feb 2026, if you purchase it for your Analogue Pocket and it doesn't work, they will be a 25% re-stocking fee deducted from any refund.\u003c\/u\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h3\u003e\n\u003ch1\u003e\u003cem\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\"Rai Den\" \u003cspan style=\"color: #362121;\"\u003ePrototype Reproduction \u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/em\u003e\u003c\/h1\u003e\n\u003ch2\u003eAbout all of the Lynx games for sale here:\u003c\/h2\u003e\n\u003cp\u003eI acquired a set of floppy disks that contained prototypes for the Atari Lynx recently and wanted to make them available for everyone to play on real hardware.  There are 95+ files across the 8 disks.  They came from someone who had a legal reason to have them and gave them to me.\u003c\/p\u003e\n\u003cp\u003eThese are high-grade reproductions.  They are playable in either a Lynx I or a Lynx II without any problems whatsoever ever.  I have had the labels professionally produced and have made the shells on my most detailed 3d printer.\u003c\/p\u003e\n\u003cp\u003eI think they turned out GREAT! \u003cspan\u003e(Note: the shells will be grey-dark grey, not black)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eYou can enjoy these now for a very low price and they will be around for years to come and not locked up in someone's treasure chest.\u003c\/p\u003e\n\u003ch2\u003eAbout the game itself:\u003c\/h2\u003e\n\u003cp\u003eThis is a very complete game.  How complete?  We do not know.  It is labelled \"Release 3 \/\/ CES Version\" when you start it up.\u003c\/p\u003e\n\u003cp\u003eCOMLYNX:  We have not yet tried to ComLynx it.  It may ComLynx if you have two copies.  We will change this description once we know for sure.\u003c\/p\u003e\n\u003cp\u003eGameplay video:\u003ca href=\"https:\/\/www.youtube.com\/watch?v=una45VwK9aU\"\u003e https:\/\/youtu.be\/b1KBSkQ5Ous\u003c\/a\u003e\u003c\/p\u003e","brand":"The Brewing Academy","offers":[{"title":"Default Title","offer_id":39289271287910,"sku":"","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0079\/4807\/5108\/products\/IMG_0349.jpg?v=1617750567"}],"url":"https:\/\/thebrewingacademy.com\/collections\/frontpage\/cartridges.oembed","provider":"The Brewing Academy","version":"1.0","type":"link"}